Takagi TK-KPE454 45 Degree Elbow

[Shop Now !!!]

Takagi TK-KPE454 T-Vent Elbows Allow you to Change the Direction of the Venting System 45 Degree Elbows are Available for Changing the Direction of the Venting System T-Vent by Takagi offers the Best in Venting Products Including: Simple Leak-proof Gasketed Connections (No Sealant Required) Quick and Easy- "Snap-Lock" Connections High Quality-Category III Stainless Steel Versatility-Vertical and Horizontal Terminations Sliding Adjustable Pieces and Convenience-T-Vent Kits are Available All T-Vent Products are UL Listed All Connections Have Heat Resistant Rubber Gaskets 45 Degree Elbow Diameter: 4.0" Length: 2.0"

• T-Vent Elbows allow you to change the direction of the venting system

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi T-KJr2-IN Indoor Tanless Water Heater Propane

[Shop Now !!!]

The T-KJr2 model is the smallest unit in the Takagi line-up. The T-KJr2 is perfect for light residential (i.e. small apartment units) and radiant heating applications.Cost-efficient and environmentally friendly the T-KJr2-IN can be converted into a direct-vent unit by using the optional TV10 conversion kit for installation in a garage a utility closet or any confined space in which makeup air may be limited. Propane19500 ~ 140000 BTU/hr0.82 energy factor6.6 GPM max flow rateIndoor intallation only. SpecificationsNOTE: All water heaters of any type MUST be installed by a trained and licensed technician. Failure to do so may result in damage injury or death. Warranties may be void if installed by non-licensed personnel. We will not be held liable for any damages injury or death caused by proper or improper installation of hot water heaters. We will not be held liable for any local state county or city code violations caused by the improper selection of water heaters.[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi TK-KPDR4 Drain Tee (Horizontal)

[Shop Now !!!]

Takagi TK-KPDR4 Drain Tee (Horizontal) Prevents Moisture and Condensate From Entering Into the Water Heater Appliance. to be Installed Horizontally T-Vent by Takagi offers the Best in Venting Products Including: Simple Leak-proof Gasketed Connections (No Sealant Required) Quick and Easy- ÒSnap-LockÓ Connections High Quality-Category III Stainless Steel Versatility-Vertical and Horizontal Terminations Sliding Adjustable Pieces and Convenience-T-Vent Kits are Available All T-Vent Products are UL Listed All Connections Have Heat Resistant Rubber Gaskets Horizontal Drain Tee Diameter: 4" Diameter1: 0.5" Length: 6.0" Length1: 2.0" Length2: 1.4"

• Prevents moisture and condensate from entering into the water heater appliance


• To be installed horizontally

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi T-M32 NG Commercial Tankless Water Heater Natural Gas

[Shop Now !!!]

The T-M32 Was Developed Specifically For Commercial Applications. The T-M32 Offers Many Benefits Including the Following: 240000 BTU/U Up To 9 Gpm (Max) The Versatility of Being Installed Either Indoor Outdoor or with a Direct Vent All with the Same Unit Easy-Link Capability up to 4 Units. You May Connect up to 20 Units and Generate Over 180 Gpm Using a Multi-Controller Unit Uses HRS Copper The Most Durable Copper in the Industry. HRS Copper is Stronger and Harder than the Standard Copper Making It Much More Resilient Against Erosion and Leaks Offers Precise Control of the Water Valves 8 New Dipswitch Temperature Settings: 100 F 115 F 120 F 135 F 145 F 155 F 165 F And 185 F. These Temperatures are Better Suited for Commercial Applications 7-Segment Led For Error Codes: Remote Controller is not Required to Pinpoint Problems Ignition Indicators: Indicates Which Burner is Fired Up at the Moment Utilizes the Air-Fuel Ratio Rod for Added Safety The Drum Thickness Has Been Increased 25% for Greater Heat Exchanger Performance and to be More Resistant to Thermal Stress Increase in Fin Pitch: Fins are More "Spread Out" Which Improves the Durability of the Heat Exchanger. More Space In-Between the Fins Reduces Build-Up. Higher Temperatures at the Top of Heat Exchanger Reduces Condensation.

• 235000 BTU - Non-ASME


• .05 GPM activation flow rate


• 4" category III stainless steel venting required


• Inlet outlet and mixing thermistors for constant temperature monitoring


• GFI fuse and surge absorber

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi T-KJr-P Propane Gas Tankless Water Heater - 140k BTU

[Shop Now !!!]

Released in 2003 the T-K Jr. is the smallest water heater in the Takagi tankless line. But this small but powerful unit - with gas inputs up to 140000 BTU per hour - can meet all the hot-water needs of a small American home or apartment with one or two bathrooms as well as smaller commercial applications. Designed to virtually do anything a 40-gallon tank-type water heater can do and more the compact wall mounted T-K Jr. can support hydronic baseboard or radiant floor heating applications as well as provide domestic hot water to plumbing fixtures and appliances. The T-K Jr. has an efficiency rating of 81% using natural gas and 83% with propane. At an average (rise in temperature) of 60°F in warmer areas - where the winter ground water is 60°F and with the output set at 120°F - the unit will provide 3.8 GPM or 228 GPH. In colder areas where the input temperature may be 40°F or less you can expect a flow rate of about 2.7 GPM or 162 GPH. Cost-efficient and environmentally friendly the T-K Jr. can be converted into a direct-vent unit by using the optional TV09 conversion kit for installation in a garage a utility closet or any confined space in which makeup air may be limited. Please refer to "Accessories" for more information on venting options. Using the average of 60°F input water cited above the T-K Jr. can provide enough hot water for one shower and a lavatory basin at a time; or one low-flow shower (2.5 GPM or less) and an appliance such as a dishwasher or washing machine at the same time. For much colder input temperatures such as 40°F or lower this unit can provide endless hot water for consecutive uses; that is running only one major fixture at a time. Please refer to the flow charts for specific rates. The four preset temperatures on the unit are: 113°F 122°F 140°F and 182°F. To achieve any temperatures other than those presets your client will require the TK-RE20 temperature controller.

• For small applications such as small apartment units or radiant heating

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi T-K3-N Natural Gas Tankless Water Heater - 199k BTU

[Shop Now !!!]

As you can see the T-K3 incorporates all those "why-don''t-you-have-this?" features into this one new product. Its larger flow capacity through parallel connections will meet the hot-water needs of most high-volume residential applications and many commercial projects too. In short the T-K3 fills the gap between the single residential heater and multiple commercial T-M1 units. Performance depends on the temperature of the ground water of course: At a delta T of 60 degrees F in warmer areas - for example where the winter ground water is 60 degrees F and with the output set at 122 degrees F - the T-K3 will provide a 5.4 GPM or 324 GPH. In colder areas where the input temperature may be 40 degrees F or less expect a flow rate about 4.1 GPM or 246 GPH.

• Compact Size


• Lower Activating Flow Rate


• Parallel Installation


• Direct-Vent Conversion - Longer vent runs


• Eight Temperature Settings

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi T-K Jr-LP Liquid Propane Flash Liquid Propane Compact Tan

[Shop Now !!!]

Takagi T-KJr Tankless Water Heater (also known as Takagi Jr) is the most compact and popular in the Takagi line of tankless products. It is perfect for domestic hot water hydronic heating or radiant heating applications in smaller residential homes or apartments with 1-2 bathrooms and can replace a 40-gallon standard storage tank-type water heater.[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi T-K3-OS NG Natural Gas Tankless Water Heater 190000 BTU

[Shop Now !!!]

This Item is discontinued and Replaced by T-K4-OS-NG (http://www.amazon.com/gp/product/B004GIDZIQ).

The Takagi T-K3-OS-NG Takagi Tankless Water Heater is a Natural Gas model and is built for outdoor installations only. This model is ideal for warmer climates does not require any additional venting (which makes the set-up process much easier and reduces the installation costs) and comes with a built-in freeze protection. It is perfect for domestic hot water or hydronic/radiant heating applications in small to mid size residential homes or apartments with 2-3 bathrooms and can replace a 50-gallon standard storage tank-type water heater. When compared to a regular storage-tank water heater installing the T-K3-OS model can save homeowners up to 45% on their monthly gas bills. Specs: Product Specs Type: Natural Gas (NG) Gas Input: 5" W.C. Width: 13-8/10" Height: 20-1/2" Flow Rate: 0.5-7 GPM Amperage: 0.67 Application: Plumbing Voltage: 120v Depth: 8-1/2" Vent Size: 4" Vent Type: Stainless Steel Wattage: 80.0 Efficiency: 0.83% Heating Capacity: 2-3 Bathrooms Water Connection: 3/4" Gas Connection: 3/4" BTU Input: 190000.0 Temperature Range (F): 113-167 F

• Tankless Water Heater


• Energy Saving


• Space Saving Outside Mounting


• Computer controls with no pilot light


• Flexable location

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi TK-BF014" Backflow Preventer For T-Vent

[Shop Now !!!]

T-Vent by Takagi offers the best in venting products including: * Simple Leak-proof gasketed connections (no sealant required) * Quick and Easy- "Snap-Lock" connections * High Quality-Category III Stainless Steel * Versatility-vertical and horizontal terminations * Sliding adjustable pieces and convenience-T-vent kits are available * All T-Vent Products are UL Listed * All connections have heat resistant rubber gaskets.

• The TK-BF01 prevents cold air from entering the vent and causing heat exchanger to freeze

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi T-K3-OS LP Outdoor Tankless Water Heater Propane

[Shop Now !!!]

• 199000 BTU


• .05 GPM activation flow rate


• No venting required


• Inlet outlet thermistors for constant temperature monitoring


• Built-in freeze protection

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi TK-RE02 Tankless Water Heater Remote

[Shop Now !!!]

Takagi TK-RE02 Remote Temperature Controller is an optional upgrade for takagi tankless water heaters which allows you to: · Override factory settings to set-up the desired water temperature · Control the water heater remotely if it's installed in concealed or hard to reach places · Monitor water flow and incoming / outgoing water temperatures · Monitor any errors Available temperature settings for the Takagi TK-RE02 are: 95 100 102 104 106 108 110 111 113 115 117 122 131 140 158 and 167F This model also replaces an older model TK-RE01. Takagi TK-RE02 is compatible with the following tankless water heaters: T-KJr T-K3-OS and T-K3-SP.[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Takagi Water Heater,it good quality.

Tags will help all customers organize and find favorite items.